Defender 90 Air Suspension Conversion Kit – DA9200

Description

Airbag Man Defender Intelliride Airbag Kit

Part Number: DA9200

Fits

• Defender 90 – Td5 onwards

Description

Height Range Automatic Mode
Ride Height up to Raised Height – Front: 40mm / Rear: 40mm
Ride Height down to Access Height – Front: -80mm / Rear: -80mm

Height Range Manual Mode
Maximum Height from Ride Height – Front: 50mm / Rear: 50mm
Minimum Height from Ride Height – Front: -100mm / Rear: -100mm

Why Intelliride ECAS?
This front and rear axle full air suspension kit incorporates on-board air control which is a fully automatic Electronically Controlled Air Suspension (ECAS) System. When fitted, the system provides comfort while maintaining a programmed ride height irrespective of the load. Multiple vehicle heights are available at the push of a button.

The on-board system has automatic load levelling at each height which continuously monitors inputs and component performance as a means of increasing safety and durability. The on-board system recognises and responds accordingly to potholes, cross-articulation and extended turns. This intelligence prevents unnecessary activity and air consumption, it even recognises unachievable heights, assisting in the prevention of possible damage above or below the vehicle.

Features

• Automatic 4 corner ride heigh control catering for all loads

• 3 pre-set heights – high, drive & low mode

• Fully adjustable via easy to use hand held control

• Front to back levelling

• Raise for clearance

• Lower for storage and access

• Inputs available for safety reset to ride height

• Manual mode

• Horizon levelling feature option

• OEM grade components for reliable performance

• High volume air springs for optimal ride quality & carrying capacity

Benefits

• Easy installation

• Excellent ride quality

• Headlights point in the right direction

• Adjustable levelling control

• Prevents bottoming out

• Stabilise body roll

• Reduces tyre wear

• Lowers maintenance costs

• Safer load carrying

• Better braking

• Improved steering & handling

Core Components 

• Rear Firestone air springs – heavy-duty rolling sleeve air springs. 

• Front Dunlop air springs – heavy-duty rolling sleeve air springs includes shock relocation brackets 

• AMK air compressor – 12 volt. Max 150 psi working pressure, high quality German built compressor. 

• 1 Gallon seamless aluminium air tank – SAE J10 APPROVED, lightweight & no corrosion. Max. working pressure 200psi. Pressure tested to 1,000psi. 3 x ¼” NPT ports (including drain port). Multi-position low profile bracket set 

• Hand held controller – 9m lead 

• ECU & valve block 

• Vehicle specific air supply mounting brackets 

• Rocker switch & height sensors 

• 6mm high quality nylon tubing

• Quick fit push to connect air fittings

• Easy to use electrical connections

• Sealed relay & harness

• Hardware

• Step by step instructions

• Operators manual